Firmware Modification Instructions Unarj some_firmware.bin (is actually an arj archive) Modify NML.MEM image Arj NML.MEM back to some_firmware.bin Pad zeros to end of some_firmware.bin until it reaches size 0xe0000 Copy hardware version string starting at address 0xdffe0 Compile dwl_checksum.c: gcc -o dwl_checksum dwl_checksum.c Calculate 32bit checksum: dwl_checksum < some_firmware.bin Copy […]
DWL-900AP+ rev.C
3 posts
Hardware Mainboard GL2422AP-1T1-B0 v1.1 v1.2 PSU AIC1563CN Input voltage: Up to 30V Output voltage: 3.3Vdc Output current Peak: 2A Continuous: 1.5A CPU Conexant CX82100-4X Core: ARM940T (ARM9TDMI) Max Clock Speed: 168MHz Unused peripherals USB1.1 1 x MII ethernet controllers Flash memory M29W800DB Capacity: 8Mbits = 1Mbyte 100,000 write/erase cycles SDRAM […]
Improvements Antenna selection remains the same for both RX and TX More TX power control settings (0 – 18dbm) Power control works on all modes Additional channels (12, 13 and 14) Better web interface Screenshots